// resource · wi-fi interview preparation

Wi-Fi 802.11 Interview Prep Guide

71 questions. Real spoken engineer answers. Not textbook definitions - the kind of explanation that shows you've actually worked with this stuff.

— Shankar K. · Free PDF · Sent on request

PART 1 - FUNDAMENTALS (Q1–Q45)

WLAN vs WAN, 802.11 standards, DHCP, TCP/UDP, OFDMA, MU-MIMO, band steering, roaming, WPA3, OSI model, subnetting, channel planning, Wireshark, and real troubleshooting scenarios.

PART 2 - ADVANCED (Q46–Q71)

BSS Coloring, TWT, DFS/CAC, WPA3 SAE at frame level, 802.11k/v/r full roam sequence, PCAP scenario questions, evil twin detection, KRACK, PMKID attack, MLO validation, test plan methodology.

Who this is for

Engineers preparing for Wi-Fi QA, platform engineer, or protocol analyst roles

CWNA and CWAP candidates who want to test their spoken explanation depth

Test engineers moving into Wi-Fi protocol or RF engineering roles

Anyone who wants answers that sound like an engineer, not a textbook

Sample questions inside

Q.

What does a WPA3 SAE authentication look like at the frame level?

Q.

AP1 is at -60 dBm, AP2 is at -80 dBm. Client is on AP1. AP1 channel utilisation gets very high. What happens?

Q.

You see RSN IE mismatch between the Beacon and EAPOL M3. What does this mean?

Q.

What does a KRACK attack look like in a PCAP and how would you detect it?

Q.

Walk me through your test plan for a new AP firmware release.

Q.

1 AP, 1 mesh pod, same SSID. Connected on 2.4 GHz to AP, move close to pod, connect on 5 GHz. Band steering or roaming?

// request the guide

Get the full 71-question PDF

Free. Send a quick email - I'll reply with the PDF within 24 hours.

Request via Email →

feedback@wlananalyser.com · Free · No signup required

What makes this different

Most Wi-Fi interview prep material gives you textbook definitions. This gives you answers written the way an experienced engineer actually talks in an interview - specific, protocol-level, with PCAP references and real failure modes.

Part 2 covers the questions most candidates can't answer. If you can explain BSS Coloring, walk through a complete 802.11k/v/r roam sequence in a PCAP, or describe what a KRACK attack looks like at the frame level - you're in the top 10% of candidates for senior Wi-Fi roles.

— Shankar K., Wi-Fi engineer, Irving TX
Building WiFi Analyser V2 · CWNA-109 in progress · shankarwifi.com

// leave a comment
// share this page
← previous
next →
SK
Shankar K., Wi-Fi engineer, Irving TX
Building WiFi Analyser V2 · CWNA-109 in progress · one post every two weeks